Surface protection of metals subjected to severe mechanical processing: deep drawing (where the film also acts as a lubricant), profiling, bending. Resists UV-radiation, and is suitable for outside use.
Application of Film
Preferably the film should be applied by mechanical means. Best results are obtained at an application temperature between 15deg.C and 40deg. C
Precautions
Adhesive properties are susceptible to change due to following parameters: chemical and physical state of the surface to be protected; presence of impurities within or on the substrate; elongation of the film during application and temperature of surroundings and of substrate.
Storage
The film can be stored for six months, in its original packaging and dry conditions. The rolls should be protected from extremes of temperature and direct sunlight. Out of its container the film should be protected against dust and other impurities
Tolerance
The thickness of the protective film has to be taken into account for the tolerances of any processing equipment coming into contact with the film.
